productivegloss66 - Blog

11 Measures to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair

You'll be surprised to find only the best way to spray car paint actually can be simple. That doesn't mean that you go at it and can simply grab a tin of paint. There are some fundamentals you must know. Both in application and the preparation.

Step A:

Prepare by assembling all your items that you're going to need. Make sure your surrounding area is protected against any potential finished spray.

Step B:

You may have to analyze the car for any rough spots. These will need to be sanded with 300 grit sand paper. This will smooth out the rough spots. Additionally, it enables the spray automobile paint to adhere better. Be sure all the dust dirt and debris are removed from the vehicle after you have finished sanding. It's imperative that the car be perfectly clean.

Measure C:

This will make sure that you get an overall even coating of your colored paint plus helps the paint to adhere well. When you spray the primer, ensure you allow for drying in between and apply light layers. How exactly to spray on car paint requires a little getting used to.

Step D:

Now you are pretty well to the point where you happen to be about ready to spray the color. Before you start with the automobile in either case, make several practice strokes on an object. Start the passes with the paint without hesitation, after you might be ready. You'll end up with uneven coverage if you hold the spray can or gun in one area and possibly Alloy Wheel Repair Hornchurch the paint will run. Should this happen you've got a significant repair job on your had. You'll most probably have directions regarding how exactly to spray car paint using the spray or gear cans.

Step E:

You might want to research this option on the internet, or check with someone which is familiar with how to spray car paint

Step F:

You are down to the finishing touches once you might be absolutely satisfied with the colour. You'll now want to apply several coatings that are clear. This will give the finished and shine look to the car along with protect the finish. It'll be up to you personally although probably two coats will be sufficient. Make absolutely certain it is dry in between coats.

Step G:


Once again, you've got the choice of wet sanding if you favor. Again, I suggest you ask the advice of people that are familiar with the way to spray paint an automobile. You need with the following grits in this arrangement if you determine to follow this measure then. This will remove spots that could not be overly light in the clear coating application.

Step H:

Now you'll want to using a rubbing compound to buff the surface so you could use a 2000 grit to remove any scrapes.

Step I:

You should now buff the surface. To do this simply use a medium cut polish. Once this has been done by you, you should have a glassy appearance that is perfect to the finish.

Step J:

As a final touch, you might want to apply a couple of coats of wax.

Tags : cars

Share on Facebook Back to the blog


Panel title
Antal besøg: 21257

Lav en gratis hjemmeside på